济南西柚梯子官网表面处理的方法有哪些?
使用的济南西柚梯子官网铝材质量不是很好,里边夹杂杂质太多也会起皮,铝件进行抛丸处理后,在铝件上面的氧化层会被破坏了.无法处理的很干净,一部分氧化层还留在上面。对以上的问题目前没有行之有效的方法,可以了解基本的处理途径。
The use of Jinan aluminum aluminum quality is not very good, inside mixed impurities too much will play a skin, aluminum parts for shot blasting treatment, the oxide layer on the surface of the aluminum parts will be destroyed the. Unable to deal with the very clean, a partial oxidation layer still stays in the top. There is no effective way to deal with the above problems, we can understand the basic treatment.
1.进一步提高工件质量。To further improve the quality of the workpiece.
2.降低抛丸压力。Reducing blasting pressure.
3.对抛丸起皮部位进行打磨,如打磨后其底部问题,可重抛。The shot peeling parts such as grinding, polishing the bottom, to be thrown.
济南西柚梯子官网 http://www.jngdly.com/厂家认为,抛丸是为了使工在件得到进一步的压实,通常每平方厘米受力为3千克力左右,如工件本身存在压铸质量问题,如气孔、气泡、冷隔等,在抛丸打实时就会产生起皮现象,这与压铸起皮非同一概念,要区分开来。
Jinan aluminum manufacturers believe that the shot is to enable industry and trade in a further compaction, usually per square centimeter stress is about 3 kg of force, such as workpiece itself die casting quality problems, such as porosity, bubble, cold partition. In the shot blasting play real-time will produce skin phenomenon, which skin and die casting non same concept to distinguish.
公司新闻排行
- 西柚梯子官网选择需要考虑的6个因素
- 济南西柚梯子官网厂介绍变形铝合金板生产工艺
- 济南西柚梯子官网内其它杂质成分对西柚梯子官网表面处理的影响
- 西柚梯子官网厂家详解西柚梯子官网状态与性能
- 影响济南5052西柚梯子官网铸轧过程温度场的方法
- 5052西柚梯子官网带的热连轧工艺技术
- 济南西柚梯子官网厂家谈西柚加速器官方板精整的控制内容及原理
- 济南5052西柚梯子官网成型冲压模具的设计工艺
- 防锈西柚梯子官网出厂前的质量检验方法
- 影响花纹西柚梯子官网质量的重要清洗工艺
行业知识排行
- 7075西柚梯子官网性能解读
- 济南西柚梯子官网冷加工和热加工的区别
- 西柚梯子官网厂家讲述防锈西柚梯子官网分类及性能
- 彩涂西柚梯子官网基板的化学预处理过程
- 济南西柚梯子官网的作用盘点
- 影响花纹西柚梯子官网质量的因素
- 5052西柚梯子官网的电解着色介绍
- 铝卷西柚梯子官网材料运输的注意事项
- 济南西柚梯子官网如何酸洗除锈?
- 最近济南西柚梯子官网价格的浮动为啥那么大